Makita’s 2.0 HP Air Compressor (MAC700) is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough job site conditions.

2.0 HP with Big Bore™ Engineered Pump

The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore™ oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions.

2.5 HP with Big Bore™ Engineered Pump

The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC2400 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore™ oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport.

3.0 HP with Big Bore™ Engineered Pump

The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency.

If you’re looking for an accurate and reliable level with a slim profile, this level is it. The Type 80 AS reinforced aluminium rectangular profile, together with STABILA installation technology, ensures accuracy and a long service life. The vials and the measuring surfaces align perfectly with one another during the production process and are permanently connected, guaranteeing the very best in measuring accuracy over many years. This is a spirit level that delivers performance.

If you’re looking for an accurate and reliable level with a slim profile, this level is it. The Type 80 AS-2 reinforced aluminium rectangular profile, together with STABILA installation technology, ensures accuracy and a long service life. The vials and the measuring surfaces align perfectly with one another during the production process and are permanently connected, guaranteeing the very best in measuring accuracy over many years. This is a spirit level that delivers performance.

The STABILA Type 196 Concrete Set, featuring spirit levels in practical lengths of 32" and 72", designed especially for concrete workers. The 32" is the optimum size for traditional footings and universal for most leveling needs. The 72" is perfect for plumbing up your form work and establishing horizontal benchmarks. The Type 196 heavy-duty frames are designed to endure construction sites thanks to STABILA’s tried-and-tested quality. The tools’ key highlight is the LOCKED VIAL system, which ensures long-term accuracy of the levels. STABILA - always a great choice for true professionals.

The STABILA Type 196 Framer Set, featuring spirit levels in practical lengths of 48" and 96", designed especially for residential and multi-family framing. The 96" level is perfect for plate to plate wall framing, great for plumbing up 8 foot walls. The 48" is an ideal multipurpose level for all your construction needs. The Type 196 heavy-duty frames are designed to endure construction sites thanks to STABILA’s tried-and-tested quality. The tools’ key highlight is the LOCKED VIAL system, which ensures long-term accuracy of the levels. STABILA - always a great choice for true professionals.

The STABILA Type 196 Tiler Set, featuring spirit levels in practical lengths of 32" and 58", designed especially for all tile-related work. The 58" level is the perfect fit for long tub walls. Find your high or low spots with this long level that transports easy at only 58". The 32" is great for tubs and showers. The Type 196 heavy-duty frame are designed to endure construction sites thanks to STABILA’s tried-and-tested quality. The tools’ key highlight is the LOCKED VIAL system, which ensures long-term accuracy of the levels. STABILA - always a great choice for true professionals.

The Little Giant Plank converts any of our multi-use ladders into a simple scaffolding. This high-strength plank, rated to hold 250 pounds, enables a person to stand erect and use both hands while on the ladder and can be stored in nearly half of its extended length.

See Compatibility Chart
250 lb. weight capacity

You want fast, convenient and safe? Meet the Little Giant Velocity. Our customers said they wanted faster setup, faster takedown and lighter weight—all with the same legendary safety and versatility of the original Little Giant Ladder. That’s why we created the Little Giant Velocity.

You want fast, convenient and safe? Meet the Little Giant Velocity. Our customers said they wanted faster setup, faster takedown and lighter weight—all with the same legendary safety and versatility of the original Little Giant Ladder. That’s why we created the Little Giant Velocity.

The Bosch 11255VSR 1 In. SDS-plus® Bulldog™ Xtreme Rotary Hammer is a versatile, handy tool that features a robust 8.0 Amp motor. From anchoring to large material breaking, it gets the job done right the first time. Engineered in the tradition of legendary Bulldogs, this powerful hammer delivers 2.0 Ft.-Lbs. of impact energy and 0-5,800 no-load BPM, but it weighs just 6.7 Lbs. The multifunction mode selector allows users to easily select among three modes of operation: rotary hammer, rotation only and hammer only. To optimize the chiseling angle, it has Vario-Lock positioning that rotates and locks the chisel in one of 36 different positions. It is Bosch’s PRO+GUARD™ dust system, helping users move toward OSHA Silica Table 1 dust compliance. The hammer is designed with an ergonomic D-handle for comfort. It features a variable-speed reversing trigger for accurate bit starting, and a Bosch-exclusive rotating brush plate, for equal power in forward and reverse. Busy pros will appreciate the tool's HammerHook, which allows the user to hang the tool on the job, and the SDS-plus® system provides for tool-free bit changes.

The AC19 Extension Ladder Covers help prevent damage to support surfaces. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Can be used on all single and extension fiberglass and aluminum ladders (except 500, D500, D7136-2 and D7140-2, D1300-2 Mk13, D1800-2EQ Mk2).

The AC96 Aluminum Stabilizer spans 47in and provides a standoff of 10in. For use on aluminum ladders of all duty ratings. Attaches in minutes. Mar-resistant rubber end caps protect the work surface. Paint can hook included. Ideal for stabilizing the M1 series multi-ladders when in scaffold or stairway positions. For use on Aluminum Ladder Series D716 (16ft), D1100 (all lengths), D1200 (all lengths), D1300 (all lengths), D1500 (all lengths), D500 (20ft to24 ft), MT (all lengths), M1 (all lengths).

• All Welded Steel Construction 
• Easy Rolling Casters 
• 150 Lb Capacity 
• Holds Panels Up To 4ft x 16ft 
• Easy Assembly 
• Raises up to 11 Ft. High 
• Loading Height 34 Inches 
• Sheet Quantity Capacity – 1 piece MAX 
• Tripod Base 
• Frame Assembly 
• Cradle Assembly 
• 2-pieces Crossarm Assemblies

This Louisville 3 foot PRO Platform step ladder has a 300lb load capacity, rated ANSI Type IA. It features an extended handrail and a 30% larger platform area for added comfort and safety. This ladder is equipped with the innovative ProTop with multiple tool slots and magnet, SHOX impact absorption system, DaBoot with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, wide back braces, and double-rivet step construction. The Louisville FXP1703 PRO Platform ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.

The 5908 Fiberglass 8ft Step Ladder has a duty rating of 225lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop® with a paint and tool holder, these Step Ladders have slip-resistant, TRACTION-TRED® steps and external PINCH-PROOF™ spreaders. The EDGE® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

The 5904 Fiberglass 4ft Step Ladder has a duty rating of 225lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop® with a paint and tool holder, these Step Ladders have slip-resistant, TRACTION-TRED® steps and external PINCH-PROOF™ spreaders. The EDGE® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.

The 150B Aluminum 2ft Step Stool has a large molded top that provides a large standing platform and a duty rating of 300lb. The TRACTION-TRED® steps are slip resistant and the external spreaders are pinch proof. Bottom step has double channel braces and the molded vinyl foot pads are riveted to the rails. The 150B is ideal for construction, plant, office or home applications.

The T6 is perfect for small projects around the house that you want to quickly check off your list. The T6 has a max detection depth of 1.1” and our 3” wide LED display instantly shows the center of studs so you can hang that shelf in no time. The T6 also runs on AAA batteries – not those pesky 9V batteries you never seem to have on-hand.

Designed with the professional contractor in mind, the 710+ is our most accurate and deepest sensing stud finder. It has a max detection depth of 1.7” while still being tough enough to withstand being dropped off your ladder or tossed into the back of your truck. The 7” extra-wide LED display not only shows you the center and edge of studs, it can also save you time and read the width of multiple studs that you’ll find around windows and doors. We’ve also given you other the features to make your job easier.

The AirShims are great for installing and leveling windows, doors, appliances, cabinets, furniture, countertops and more.

Whether you're a skilled builder installing windows, doors or cabinets or a homeowner trying to level a washing machine, you'll be glad you have this easy-to-use yet powerful tools.

AirShims are powerful enough to support up to 300 pounds and soft so they won't scratch surfaces. AirShims span gaps from 3/32" to 2-1/2" and eliminate the need for shims and wedges.

Just squeeze the easy-to-use hand pump until you get the object you're working on into position. Use them as inflatable pry bars to lift, shift, align, level, plumb, adjust, or just hold materials still.

You can even use them to pry objects apart (like fragile baseboards and trim from a wall) without damage. For some challenging jobs, like leveling windows, doors or heavy appliances, using more than one AirShim is recommended.

The AirShim Pro XL is an Inflatable Pry Bar and Leveling Tool that is great for installing and leveling cabinets, doors, windows, appliances, furniture, countertops and more. Its long, narrow design provides for greater lifting in the contact area.

Whether you're a professional builder installing cabinets, windows or doors or a homeowner trying to level a washing machine, you'll be glad you have this compact yet powerful tool. Replace shims and pry bars and free up your hands to work.

It is powerful enough to support up to 500 pounds and soft so it won't scratch surfaces. The AirShim Pro XL spans gaps from 3/32" to 3" providing precise adjustment while lifting, aligning, leveling and plumbing during installation. Plus with its 10.75" long surface, the AirShim Pro XL provides a stable lifting platform that does not wrap or fold around narrow work surfaces like a door edge.

Great for when you work alone and need to move or align bulky items. Just squeeze the easy-to-use hand pump until you get the object you're working on into position. Use this inflatable pry bar to lift, shift, align, level, plumb, adjust, or just hold materials still.

You can even us